Correcting the water damage in your bathroom is usually a time consuming task depending on the severity of it, but the prevention of such damage is usually within the reach of most homeowners. The fact is that preventing this damage is usually much, much easier than the act of having to actually repair it after it has already occurred. Steam from showers and baths can discolor ceilings and cause mold growth, overflowing toilets onto cracked tile can lead to rotting of the floor underneath it, and there is always the possibility of mold growth. You should do what you can to protect this room in your home, since it is one of the most important rooms along with the kitchen.
There are a few different areas of your bathroom that you need to keep an eye on and look for any sign of abnormalities in on a regular basis. These areas that are the most at risk are the toilet, shower, bath tub, and the sink.
The bath tub and shower usually require some special attention, since these are the largest sources of water in the room and present the most risk. Over time, the tiles around the tub and shower can become cracked and if it is allowed to overflow, the floor underneath can become so damaged that the whole floor will need to be taken up and redone. Missing grout can also cause this. Repair the tile floor as soon as you notice cracks in it. Also make sure that the caulking around the tub is not loose or missing and if it is, you should re-caulk this yourself or have a professional do it for you.
Check the plumbing underneath the sink and make sure that there are no leaks. Loose seals in this plumbing should be replaced as soon as possible, as well.
The toilet can also overflow and the tile around this area can also be breached if it is cracked, so in the same manner as the area around the tub, the cracked tile needs to be dealt with. Keep your toilet from overflowing by not putting more paper in the toilet than it can handle. A lid lock can be purchased and put on toilets in homes that have small children that are prone to putting things in the toilet that do not belong there.
If you can see signs of moisture on the drywall, then you might also have a problem in the plumbing running through the walls. You need to call in a professional to deal with this problem.
Showing posts with label rot. Show all posts
Showing posts with label rot. Show all posts
Friday, January 18, 2008
Bathroom Humidity and Mold Problems
A relaxing bath or shower can be just what you need after a long day at work, but when you look up and around you and you see mold starting to grow on the walls, the relaxation usually gets ruined by the worry about that mold problem. It shows itself as a splotchy growth on the drywall and it usually moves slowly from one end of the room to the other. If left untreated, it will eventually cover the rest of your bathroom and then you really will not have much of a good time bathing.
Most of the time drywall that becomes contaminated needs to be taken out and thrown away, unless the growth is very new and superficial. If it is old growth and is found to be embedded into the wall, then the drywall cannot be cleaned, since it is such a porous surface. This is unfortunate, because tearing out drywall and replacing it can cost quite a bit, especially if you have to hire someone else to do it for you.
A lot of people seem to like installing carpet in their bathrooms, but what they may not realize is just what a very bad idea this is. Water and mold go hand in hand and once carpet gets wet and is allowed to stay that way on a continuing basis as it will be in a bathroom, it eventually begins to mold. When carpet gets moldy, the unfortunate fact about this, as with drywall, is that it usually has to be thrown out. Carpet can be cleaned, but the padding underneath it cannot and if mold continues to grow on the padding, any new carpet that you put over it will also be contaminated and so will the old carpet if you attempted to clean it.
Try to keep the humidity in the bathroom down by installing an exhaust vent to let steam and moisture out of the house. Also keep wet items of clothing and towels washed as often as possible and avoid letting them stay on the floor, especially a carpeted one.
Keep an eye on your toilet and make sure that it is flushing properly and that the members of your house are not putting too much toilet paper in it. Feminine napkins can sometimes be put into toilets, but this is usually only recommended for homes that are connected to city sewer systems. Homes with septic tanks tend to have a harder time with feminine napkins being put in the toilet and can stop up the whole system, particularly if the pipes are old and corroded.
Most of the time drywall that becomes contaminated needs to be taken out and thrown away, unless the growth is very new and superficial. If it is old growth and is found to be embedded into the wall, then the drywall cannot be cleaned, since it is such a porous surface. This is unfortunate, because tearing out drywall and replacing it can cost quite a bit, especially if you have to hire someone else to do it for you.
A lot of people seem to like installing carpet in their bathrooms, but what they may not realize is just what a very bad idea this is. Water and mold go hand in hand and once carpet gets wet and is allowed to stay that way on a continuing basis as it will be in a bathroom, it eventually begins to mold. When carpet gets moldy, the unfortunate fact about this, as with drywall, is that it usually has to be thrown out. Carpet can be cleaned, but the padding underneath it cannot and if mold continues to grow on the padding, any new carpet that you put over it will also be contaminated and so will the old carpet if you attempted to clean it.
Try to keep the humidity in the bathroom down by installing an exhaust vent to let steam and moisture out of the house. Also keep wet items of clothing and towels washed as often as possible and avoid letting them stay on the floor, especially a carpeted one.
Keep an eye on your toilet and make sure that it is flushing properly and that the members of your house are not putting too much toilet paper in it. Feminine napkins can sometimes be put into toilets, but this is usually only recommended for homes that are connected to city sewer systems. Homes with septic tanks tend to have a harder time with feminine napkins being put in the toilet and can stop up the whole system, particularly if the pipes are old and corroded.
Wood Rotting Mold
A mold that plagues some homes and should not be underestimated is Meruliporia incrassate. This is a fungus that causes a severe amount of rotting in the wooden parts of your home and this is extremely difficult to get rid of, since is has the ability to collect and retain water over a longer period of time than other molds. It typically extends itself through not only the wood, but other porous materials that make up your home and find the water that it needs in order to stay alive.
The news calls this a “house eating fungus” because it will eventually do just that if it is left untreated. The decay of the wood framing of your home is inevitable if this infestation is not removed as soon as possible. This usually shows up in the areas of your home that are the most moist, such as the bathroom, kitchen, and the basement. This mold appears as a somewhat yellowish dust on the areas that are affected. In order to keep this growth from returning, you will need to remove all of the materials affected by it and then some. Simply trying to clean this mold with disinfectants or bleach will not work under any circumstances. Cleaning any other kind of mold off of a porous surface with bleach or any other disinfectant is usually not possible, but this kind of mold cannot be gotten rid of in this way at all.
About two extra feet of infected material needs to be removed from the home before the infestation will be gone for good. This means if the visible infection spans about 4 feet of a wooden beam, then an extra two feet needs to be removed on each side of it to be sure that you get all of it. This mold likes to extend strands of itself out about this length in order to retain the water that it will use to keep itself alive. Getting rid of this extra material may seem like a waste, but it is really the only way to be certain that it does not come back.
As long as your previously affected area remains dry for a long time after the infected wood was removed, the infection should not return. Keeping the previously affected area as dry as possible may help keep the mold from coming back, even if some of the wood remained infected after you removed the majority of it.
The news calls this a “house eating fungus” because it will eventually do just that if it is left untreated. The decay of the wood framing of your home is inevitable if this infestation is not removed as soon as possible. This usually shows up in the areas of your home that are the most moist, such as the bathroom, kitchen, and the basement. This mold appears as a somewhat yellowish dust on the areas that are affected. In order to keep this growth from returning, you will need to remove all of the materials affected by it and then some. Simply trying to clean this mold with disinfectants or bleach will not work under any circumstances. Cleaning any other kind of mold off of a porous surface with bleach or any other disinfectant is usually not possible, but this kind of mold cannot be gotten rid of in this way at all.
About two extra feet of infected material needs to be removed from the home before the infestation will be gone for good. This means if the visible infection spans about 4 feet of a wooden beam, then an extra two feet needs to be removed on each side of it to be sure that you get all of it. This mold likes to extend strands of itself out about this length in order to retain the water that it will use to keep itself alive. Getting rid of this extra material may seem like a waste, but it is really the only way to be certain that it does not come back.
As long as your previously affected area remains dry for a long time after the infected wood was removed, the infection should not return. Keeping the previously affected area as dry as possible may help keep the mold from coming back, even if some of the wood remained infected after you removed the majority of it.
Subscribe to:
Posts (Atom)
